Open before standing.
Press the remote while seated on the bed. The small padded lid opens before the person rises.
Development visualization · fictional person and clean stand-ins · not a transfer test
Dignify Life / The film journal
Every detail.
A human reason.
Close looks at the chair’s inner workings, its intended care routine, and the everyday dignity behind the idea.
The final mixing cutaway hides the coir to reveal the stationary agitator. It is an analytical view; the coir is not physically emptied during mixing.
Opening, mechanisms and care.
A single overview of remote opening, accessories, the eight internal-function views and the intended bag change.
Development visualization · fictional person and clean stand-ins · not a transfer test
Same bin. A fresh beginning.
Follow the intended bag change: withdraw the cassette, lift the lid and attached agitator, release the rim, replace the bag, refit, charge coir and dock.
CAD motion study · intended service sequence
A familiar face, in full view.
The Optional Mobile Cradle is intended to turn on a voice command or an incoming video call. Horizontal travel up to 360°, then back in the opposite direction.
Accessory motion study · integration in development
One support. Both directions.
A fixed floor-to-ceiling support pole with a manually swiveling grab handle, shared between bed and chair.
Accessory motion study · not a transfer test
A coordinated welcome.
The padded top lid and the separate motorized solids shutter open as a coordinated sequence.
Source-CAD visualization · development design
Two paths, carefully separated.
Clean liquid illustrates the forward urine path; clean coir stands in for the downward solids path.
Source-CAD visualization · clean stand-ins
A clear route into the bin.
The cutaway explains the intended drop path beside the stationary agitator, with no exposed waste.
Source-CAD visualization · clearance requires testing
Close softly. Then mix.
Departure initiates the coordinated close; mixing follows only with covers closed and the cassette docked.
Source-CAD visualization · intended controls
A motor anchored to the frame.
A frame-mounted motor drives a rubber tyre against the heavy-duty gray HDPE bin.
Source-CAD visualization · development design
The bin turns. The agitator stays.
The rotating bin moves the clean coir around a stationary lid-mounted stainless agitator.
Source-CAD visualization · illustrative coir
Air moves from both vessels.
Headspace air is collected from the solids and urine vessels, then passes through the fan and filter.
Flow illustration · fan performance unverified
From the chair to outdoors.
The low rear exhaust joins the 2-inch outdoor duct. The intended five-metre run needs an installed airflow test.
Flow illustration · not an operating-point test
The assembly, from the front.
Inspect the frame, collection vessels, lid mechanisms and internal assembly from an exploded front view.
Source-CAD visualization · presentation derivative
The assembly, from behind.
A rear exploded view reveals the cassette, drive and ventilation packaging.
Source-CAD visualization · presentation derivative
These films explain a product in development. CAD motion and AI-staged scenes illustrate intended behavior; they are not footage of a built, tested chair. Read the development notes